Products

26SCD Smoke Damper

The 26SCD has been designed to meet the requirements of the Smoke Control standard BS EN 12101 which is a harmonizes standard. This smoke damper has been tested to 1366-10 for the blades to open and remain open for 2 hours – also to 1366-2 to ensure the blades remain closed ad maintain their integrity for 2 hours as required by BS 9999.

For more information on the 26SCD smoke damper damper, please download the brochure below.


Material Specification

Blades: Double Skin 1.0mm galvanised mild steel as standard, Double skin 1.0 grade 430 stainless steel optional

Frame: 1.6mmm galvanised mild steel standard, 1.6mm grade 430 stainless steel optional

Frame Corners: Die formed corner channels, button locked for strength and rigidity

Casings: 1.2mm galvanised mild steel standard 1.2mm grade 430 stainless steel optional

Casing corners: Welded mitre corners finished with aluminium aerosol spray.

Linkage: External linkage. Enclosed within the frame and out of air stream. Zinc electroplated mild steel.

Bearings: Stainless steel 

Axles: 12.7mm diameter zinc electroplated mild steel bolted directly through the blade

Jack Shaft: Zinc electroplated mild steel

Top, bottom and side jamb seals: Cambered grade 301 stainless steel

Frame: 1.6mmm galvanised mild steel standard, 1.6mm grade 430 stainless steel optional

Casings: 1.2mm galvanised mild steel standard 1.2mm grade 430 stainless steel optional

You may also like to consider

Control Panel System 32 & System 32S

Addressable panels to control up to 200 (32) or 300 (32S) fire and smoke dampers

more details

Control Panel System 42

The Control Panel System 42 is suitable for projects where the client wants to control the Fire/Smoke dampers from more than 8one location and minimises cable installation cost by reducing the necessity to run all of the control loops back to one main

more details